Monthly Archives: June 2015

.22 mag for Self Defense?

by Woodsbum

There seem to be all sorts of debates around what is the best self defense round and firearm to carry. The LEO community always seems to think that the subcompact framed semiauto pistols are the only way to go where many of the tactical guys advocate carrying their favorite Glock or 1911 at all times. There is a startling reality in the world of self defense carry…….   Those large pistols cannot be carried at all times because they are TOO DAMN BIG!!!

Seriously. How many of these “I carry all the time” guys actually carry at all times? There is no way that someone advocating the carry of a Combat Commander can carry that huge monstrosity while working out at the gym. If they say that they do it is a lie. How can you conceal it? This is simple. You can’t.

This leaves you with pocket guns or mini revolvers. Of those, you really have the following calibers:

  • 380 acp
  • 32 acp
  • 25 acp
  • 22 mag
  • 22 lr

Now the big debate comes in as to which one to carry. Most of the time it comes back to the bigger is better debate, which is what got you in this pickle to begin with. If you pick too big then you can’t conceal the firearm and are back to square one. If you go too small then there might not be enough stopping power in the cartridge to save you if you need it. Truly, this is a sticky situation that leaves you without any real answers and just more questions.

Let’s look at the ballistics of each of these calibers. Maybe that will help you make your own decision. I am picking some decent loads and will try and stay with the same brand for each caliber. The 22 lr and mag will be different obviously. If you want to do some detailed research you can check out http://www.ballistics101.com for a huge list.

Here are some Hornady Ammo comparisons:

Hornady Ammunition Ballistics

Round Type Weight Muzzle Energy ft·lb Muzzle Velocity ft/sec.
32 ACP XTP HP 60 133 1000

Hornady Ammunition Ballistics

Round Type Weight Muzzle Energy ft·lb Muzzle Velocity ft/sec.
25 ACP XTP JHP 35 63 900

Hornady Ammunition Ballistics

Round Type Weight Muzzle Energy ft·lb Muzzle Velocity ft/sec.
380 Auto FTX CD 90 200 1000
380 Auto HTP HP 90 200 1000

Here are the specs for the CCI rounds I use in my .22 lr and .22 mag:

Maxi Mag # 0024

Caliber Bullet Weight (gr) Bullet Type Box Count
22 Win Mag 40 JHP 50
Velocity, ft/sec

Muzzle 50 yards 75 yards 100 yards
1875 1574 1438 1319
Energy, ft-lbs

Muzzle 50 yards 75 yards 100 yards
312 220 184 155
Trajectory if sighted at 100 yards

25 Yards 50 yards 75 yards 100 yards
0.1 1.0 1.1 0.0

Mini-Mag HV # 0030

Caliber Bullet Weight (gr) Bullet Type Box Count
22 Long Rifle 40 CPRN 100
Velocity, ft/sec

Muzzle 50 yards 75 yards 100 yards
1235 1092 1040 998
Energy, ft-lbs

Muzzle 50 yards 75 yards 100 yards
135 106 96 88
Trajectory if sighted at 75 yards

25 Yards 50 yards 75 yards 100 yards
0.7 1.3 0.0 -3.3

As you can see, there is a huge variance in the actual loads. The energy from the 25 acp, 32 acp, and 22 lr is really kind of dismal. There is not much energy to create a lot of hydrostatic shock and the bullet weights are not big enough to create a very large wound channel. This means, in layman’s terms, that these calibers just will not do a lot of damage. Of course you have that debate of damage versus firearm size. If you can get by with an LCR in size then do it. If you have enough fat rolls to hide an AR15 pistol then you are set. It all comes down to what you are comfortable concealing and carrying in various situations.

The 380 acp and 22 mag both have much more energy and or bullet weight. The 380 has over 2x the bullet weight, but only 2/3 the energy of the 22 mag. Again, you have to figure out if you want the blooshot meat or penetration/wound channel.

No matter what you use it comes down to one important factor. Are you TRULY going to carry your pistol with you EVERYWHERE you go? If not then quit bugging those that do about the size of your firearm or power of your pistol’s cartridge. It won’t matter because you won’t have your pistol with you anyway…….

This is just my take on the situation, but it stands to reason that those that do carry 100% of the time have the advantage over those that don’t. This also brings up the point that there is no reason why I can’t slip my M&P into a shoulder holster when I have on clothing that can conceal it – then I am carrying 2 pistols to your 1.

Think about it before you make up mind on what you really want to carry. Personally I will keep carrying my .22 mag for self defense and backup because it literally is with me 24/7. Of course I toss in a larger firearm if I need to.

  • Share on Tumblr

Hunting Dog

by Woodsbum

I was going to continue my body armor posts last week, but had a small detour. My puppy was ready for pickup. This is Angus, by 6 1/2 week old yellow lab. Although he isn’t registered, I think he will end up being a great bird dog. His temperament is great, he seems to be crate trained regarding bathroom necessities after only a few hours, and is already recognizing his name and our voices after only 1 day. This little guy seems like a great find.

Angus the yellow lab

Angus the yellow lab

His mother had to have a cesarean and thus he was bottle raised until a couple weeks ago. I will be fixing his grocery store dog food diet and put him on sporting dog food this week. Changing food is always a tough go because they end up with stomach issues many times. He also will be starting his obedience, swimming familiarization and bird familiarization training this week as well. This little guy doesn’t know it, but he has his education all planned out.

I usually start with only a couple minutes of actual training every couple hours. It builds up to about 15 – 20 minutes training sessions with constant reinforcement between sessions. I go for little amounts over time with 100% consistency to ensure that the pup knows what is expected at ALL times. The dogs I do this with just end up much more interactive and responsive in my opinion. If I was training him for someone else, I would do it differently. The method I use makes a REALLY strong bond between me and the pup. I wouldn’t want that if I was training him for someone else.

As I run across things I will continue to post them up here.

Here is a parting shot:

Sleepy puppy

Sleepy puppy

  • Share on Tumblr

Sights

by Woodsbum

Over the years I have shot firearms with many people at ranges or out in the woods just plinking. Many times I find that the person I am shooting with can barely hit a target let alone shoot a decent grouping on the target. It seems that they don’t focus on their front sight post and are more looking through their sights. I ran across this video linked on a forum and thought that it might help a few people with their accuracy. It is all based upon focusing on your front sight post.

This first video covers the basics of what sights are and the mechanics. Even though this video is based upon airgun sights, it is good information and I like the music in the background. It reminds me of old “hillybilly” TV shows that I watched as a kid.

This is the video for those that already have the fundamentals. This is a great video.

  • Share on Tumblr

Lee Bulge Buster

by Woodsbum

I have been having one heck of a time with some reloaded .45 ACP rounds cycling properly through my 1911. My father mentioned that there was a product called the Lee Bulge Buster. It works to remove the funny bulge that is left from unsupported chambers found in firearms like the Glock. When reloaded, these rounds tend to not properly fit into a fully supported chamber.

This seems to be a $40 tool that can even remove the bulge in loaded rounds. I am actually quite amazed and VERY excited to get the almost 1k rounds I have laying around fixed so that they can actually feed and chamber properly.

 

The kit and a factory sizing die is required. Do not use a taper die. It will not work. Just take the internal parts out of the sizing die and it will push the cartridge through.

 

  • Share on Tumblr

Body Armor – Part 1

by Woodsbum

Although I don’t like to be called or considered a “prepper” per se, I do believe that it is the responsibility of every adult to ensure the safety and welfare of their family. This includes safety items such as guns and associated equipment. Lately, I included body armor as part of that equipment due to some recent national and local incidents that truly gained my attention. I have started buying body armor and tactical pieces for my son, my wife, and myself. There are also additional reasons that I feel that this is important such as: I am a bouncer at a bar on the weekends and I teach hunter’s safety classes with live fire. Either way, it has become an item that was high on my list of required equipment.

The first post in this series (Body Armor – Part 1) will cover what I initially purchased and branch out to what changes I have made to my initial investment. More correctly it will explain what I purchased and why, then will add more depth to the already murky water I have entered in my search for proper/appropriate ballistic protection. Body Armor – Part 2 is located here. It will cover the information about the police surplus armor I picked up, my thoughts on it, and what I plan to do to it so that it will fully suit my needs.

When I first started looking at body armor, step 1 for me was the carrier. I was VERY persnickety about the carrier and what I wanted in a carrier. My criteria were as follows:

  • Multicam or Coyote in color. I did not want digital or black…. ESPECIALLY ACU. I am not fond of camo built only for rock quarries.
  • Padded shoulders that make it actually comfortable.
  • That it fit, which means that it be capable of fitting a large framed person.
  • That it not be as breathable as possible.
  • Something less than $300.

What I ended up with was the Mayflower APC.

Mayflower APC

Mayflower APC

I am not fond of having all sorts of crap hanging off my chest so I only added a kangaroo pouch for 3 magazines to the carrier for normal wear. I do put my 1911 on the front in a military surplus flapped holster when I am not wearing my battle belt. My other mag pouches, holster and dump pouches are on that battle belt. Eventually a radio pouch will be added for my HAM radio, but I have been having a hard time finding a pouch that I like and fits my Yaesu. Basically, what you see now is what I use on my carrier. Of course everyone is different so other people might have things dangling left, right and sideways.

I felt that using a Taz blanket in the background was completely appropriate considering we are showing tactical items.

Mayflower APC

Mayflower APC

When I started looking for plates, I was interested in saving as much weight as possible while providing the most protection all for the cheapest price. This was tough to do since most lightweight plates are not big enough and those that are big enough are pretty much only the AR500 materials. Since I did not have $1000 per plate to spend on custom poly plates I was really stuck with either ceramic or steel. It ended up with me purchasing Level VI – in conjunction with – plates from BulletSafe. They have a video where they shoot the crap out of one of their plates and it seems to stack up quite nicely against other manufacturers. Add the $180 price tag per plate and I was sold. Now I have found that the 12×10 plates are just too small for my large frame. I was originally going to get Level IIIA backers and just run with what I had, but then I ordered a Level II vest to wear concealed as I needed. This changed my outlook on my plates and I ended up ordering some AR500 plates instead. These ceramics will be passed along to my wife.

Plates

Plates

The side panels I picked up are Level IIIA soft armor. Level III side plates seemed to all be of the steel construction or only 6×6 sized in ceramic. This left me thinking that 5×13 was bigger than 6×6 so I went with soft armor for at least a little bigger area getting some protection.

Since I found an AR500 kit in 14×11 front/back plates with 6×8 side plates, I figured I would increase my coverage area and forgo the Level IIIA backer plates. The weight difference is still going to be a total of 6 lbs between both ceramics with backers and the AR500 plates. Now I am wondering if I should either add the plates to the front corners of my vest to work as added abdominal/side protection in addition to my side panels or keep the current Level IIIA soft armor as is and give the side plates to either my wife or son.

Side Panel

Side Panel

Another wrench to throw into my whole quagmire of bulletproofing is that I picked up a Level III abdominal plate that is still 7 weeks or so from being built and delivered. It will look like this.

Abdominal Ballistics System

Abdominal Ballistics System

Because I have added this additional piece, now have extra large steel plates for front and side, have Level IIIA side panels, and am getting a Level II soft vest I really need to sit down to figure out how I am going to divvy all this out. Either that or I can go walking around like a juggernaut. The reason I picked this up was due to my experiences in the field dealing with GSW victims. Many victims I saw had been gut shot where vascular structures or such items as kidneys were hit. This can cause someone to bleed out and die as quickly as a chest wound. It only made sense to me that abdominal protection was needed to properly protect me in the even that this gear was worn for real.

The argument that pelvis and upper leg protection, neck protection and even upper arm protection would be needed if I was go so far as to include abdominal protection. I don’t think I will end up going that far because a reasonable expectation of movement must also be factored into the whole process. If I add all this additional ballistic protection I will be moving like the kid from Christmas Story when his mom bundles him up. If I fell over I would be like an overturned turtle trying to break dance. All in all it would be bad.

So at this point, I have spent a crap load of money and am still not sure how I want to outfit my family or myself. I do believe that it has helped me to start off small and then add to this project so I can pass things down the line that don’t work. My only concern is that I will end up wasting money in the long run on items that don’t fit into any of our “kits.” Only time will tell, but I do have quite a good base to start with.

Next week I will show you my soft armor in Body Armor – Part 2 and continue with my saga.

  • Share on Tumblr